Series OPTIMUS

OPTIMUS is a high speed 2D fiber laser machine for cutting worksheet sizes up to 1250*2500 mm. The model provides a superb all-round performance and produces a steady and reliable output with unparalleled quality and speed. Aimed to be one of the most compact machines in a world, OPTIMUS has unprecedented competitive price/quality ratio.

CNC Control

Mitsubishi CNC M720VW Series is a state-of-the-art model that provides high-speed and high-accuracy machining and advanced control technologies. Mitsubishi Electric Factory Automation technologies are condensed into a 64 bit RISC processor and an exclusively developed high speed LSI. The basic CNC functions, built-in PLC and graphic performance are all improved.

Servo Drivers

MDS-D-SVJ3 Series-Servo Drives 

  • Ultra-compact drive units with built-in power supplies contribute to reducing control panel size.
  • The connection between the drive unit and CNC is fast and reliable optical communication.
  • A high-efficiency fin and low-loss power module have enabled unit downsizing, which also leads to a reduction in control panel size.
  • Higher-grade CNC performance attained

Drive system

The precise AC servo motors Mitsubishi Electric put up in motion X, Y and Z axis of the machine by helical hardened rack&pinion product of Gambini meccanica, with quality class Q7 that ensures the extreme acceleration up to 10 m/s and velocity of 80m/min. The motion is carried out by linear bearings with ball rail system a product of Bosch Rextroth.
The motion between servo motor and pinion is delivered by high-precision transmission servo gearbox almost zero backlash.

 HF Series-Medium-inertia Motor

  • High-inertia machine accuracy is ensured.
  • Suitable for machines requiring quick acceleration.
  • Range: 0.5 to 9[kW]
  • Maximum speed: 4,000 or 5,000[r/min]
  • Supports two types of detectors with a resolution of 260,000, 1 million p/rev.

    Laser source

    The machines from series GLADIUS/OPTIMUS have been completed with fiber optic laser sources produced by IPG Photonics, series YLR (rack mount laser module) with power capacity of 300W and 500/1000W.

    Control panel

    An ergonomic control panel completed with implemented touch screen defines the machine as user- friendly. The operator has facilitated access to working area and can easily perform monitoring during the operation mode by the integrated Jog dial and fast access buttons on the control panel.

    Dust and particle collection system

    The dust and particle collection system comprises of 3 sections for Gladius, and 4 for Optimus, as well as drawers that are located just under the working table.

    Filtration system (option)

    The smoke and gas filtration system itself is represented by a closed cassette type filtration system that comprises of 2 rows x 4 different in type and functionality filters.
    This is the filtration for the compact models GLADIUS and OPTIMUS.

    Cutting head

    ProCutter head offers a complete solution for the fiber laser cutting of thin and medium material thicknesses. High-quality optics ensures optimum shaping and guiding of the laser beam. The wellknown Lasermatic® distance control guarantees a fast, accurate and drift-free distance measurement at any operation conditions and stable cutting process. The potential of the cutting head is optimally converted into productivity.

    A unique electronic system is specially designed to keep safe and to prevent the cutting head from collision. In case of obstacle during the cutting process, the CNC stops the cutting ray and breaks the head movement.

    LightCutter is suitable for integration in small and medium-sized flatbed cutting systems. Stainless steel and aluminum can be cut with the best cutting quality to a gauge of 5 mm, mild steel to 10 mm. The completeness of the sealed beam input protects the optic from contaminants. A flushing air system provides protection for the collimated and focusing optics from external influences. The LightCutter can be adapted to different laser and process requirements with various lenses.

    EFFICIENT

    • lightweight and slim design created for fast acceleration and cutting speed
    • motorized focus position adjustment for automatic machine setup and piercing work
    • drift-free, fast-reacting distance measurement
    • permanent protective window monitoring
    • values displayed via Bluetooth

    USER-FRIENDLY & SAFE

    • completely dustproof beam path with protective windows
    • LED operating status display
    • display of operating parameters via Bluetooth and interface for machine control
    • pressure monitoring in the nozzle area (gas cutting) and in the head
    • monitoring of the piercing process and detection of cutting breaks with CutMonitor

    Cooling system

    There is air cooling for the machines completed with laser sources up to 500W. The cooling for machines with sources over 500W has been performed by air-water chiller that is incorporated inside or it is freestanding outside.

    Gas control system

    The machine is equipped with a system that automatically selects among 3 types of assisting gases and proportion valve for pressure control, which is controlled automatically by the CNC control unit. The operator chooses the assisting gas in dependence of the type of the processing material. The right assisting gas can be specified by the operator by using a preliminary created table with parameters.

    UPS

    UPS (Uninterruptable Power System) is an electrical device that provides emergency power to a machine when the input power source, typically main power fails.
    The main function of UPS is to ensure normal work of the powered equipment for a short time in case of electricity cut-off. Not only does UPS backup the power but it ensures quality power availability. At the same time, the unit keeps an eye on the parameters of the main power supply and in case of interruption or values out of the determined range, the unit automatically switch to battery supply preventing damages in the laser source and/or the electrical equipment.

    acrups-2-logo

    ACRUPS 2® POWER REDUCTION SYSTEM

    ACRUPS 2® reduce residual power in the system that remains after cutting.
    The worldwide patented system aimed to reduce the useless heat power that remains after cutting. The system comprises of copper louvers that are located between the cutting surface and the body of the machine that absorb the residual power evolved during the laser cutting process. That way, the system keeps safe the machine parts from the destructive power of the laser beam. Otherwise, and without existing of the ACRUPS 2® system, the distance between the cutting surface and the components of the machine should be quite long, approx. 700x1000mm. The system ACRUPS 2® enables to reduce the necessary distance by 250mm. Such space-saving provide possibility to assemble the main components of the machine right under the working surface. The system prevents slag from depositing on the copper louvers. That means easier cleaning and maintenance.

    The system ACRUPS 2® is built-in the laser cutting machine for metal sheet cutting in OPTIMUS.

    PATENT PENDING №112129. 

    HMI/CAD/CAM

    MITSUBISHI

    PRO-MMI from Mitsubishi is a professional HMI/CAD/CAM software specifically developed and incorporated in the laser cutting machines that brings together all functions needed for operation of the machines.
    It contains the basic menus as follows:
    -CNC -Technology for cutting
    -CAM modul
    -CAD module
    -Maintenance
    That have the basic functions, such as:

    • Standard: Import DXF, DWG, IGES, etc.
    • Option: IGS, STL, HPGL, ESSI
    • Drawing Objects: Line, Circle, Arc, Polyline, Hatch, Barcode
    • Modify: Move, Rotate, Scale, Trim, Break, Erase, Mirror, Leadins, Leadouts
    • Contour Tracing
    • Loops, Bridges
    • Copy XY, True Shape Nesting

    CAD/CAM

    LANTEK

    Lantek Expert Cut is in CAD/CAM system specially designed to automate the programming of sheet metal cutting machines. It is the result of over 25 years experiance and close collaboration with both manufacturers and users of this type of machines.
    It perfectly combines machine technology with the customer’s programming and managements needs. Lantek Expert Cut offers an advanced, intuitive and friendly interface able to improve the user’s afficiency when it comes to programming.

    • Standard: Import DXF, DWG, IGES, etc.
    • Option: IGS, STL, HPGL, ESSI
    • Drawing Objects: Line, Circle, Arc, Polyline, Hatch, Barcode
    • Modify: Move, Rotate, Scale, Trim, Break, Erase, Mirror, Leadins, Leadouts
    • Contour Tracing
    • Loops, Bridges
    • Copy XY, True Shape Nesting

    Technical specifications OPTIMUS

    Download .pdf
    Series Specifications

    • Optimus | Working area 30m2

    Other machines

    Required space for installation: over 77sq.m